Check with seller Tuyển dụng Hồ Chí Minh CÔNG TY CỔ PHẦN REAL-TIME ROBOTICS VIỆT NAM cần tuyển

[Tuyển dụng Hồ Chí Minh] CÔNG TY CỔ PHẦN REAL-TIME ROBOTICS VIỆT NAM cần tuyển

Thu nhập:
Thỏa thuận
Loại hình:
Toàn thời gian





Chức vụ:
Nhân viên
autocad
iso
nx
cơ khí
Mô tả công việc
An Electrical and electronics engineering Subject Matter Expert (EE-SME) provides specialized knowledge in
electrical engineer
ing, ensuring compliance with industry standards. They collaborate with cross-functional teams to troubleshoot complex issues, validate designs, and mentor junior engineers, driving innovation and quality in product development while adhering to safety regulations.
Key responsibilities
N.B. candidates must read requirements below carefully and manually match each of them to their previous experience. This should be shown in a cover letter. A single CV/résumé is not acceptable.
• Technical Expertise
o Description: Provide in-depth knowledge and expertise in electrical engineering principles, practices, and technologies.
o Tools/Standards: Familiarity with IEEE standards (e.g., IEEE 802.3 for Ethernet), IEC standards for electrical installations, and industry best practices.
• Project Support
o Description: Collaborate with project teams to ensure electrical designs meet technical specifications and project requirements.
o Tools/Software: Use project management software (e.g., Microsoft Project, Asana) and design tools (e.g., AutoCAD Electrical, Altium
Designer
).
• Problem Solving
o Description: Analyze and troubleshoot complex electrical issues to develop effective solutions.
o Tools/Methodologies: Employ root cause analysis techniques and tools like fault tree analysis (FTA) or failure mode and effects analysis (FMEA).
• Quality Assurance
o Description: Review and validate electrical designs, ensuring compliance with industry standards and regulations.
o Standards: Adhere to ISO 9001 quality management systems and IPC standards for electronics design and manufacturing.
• Documentation
o Description: Create and maintain technical documentation, including specifications, reports, and manuals.
o Tools/Software: Utilize document management systems (e.g., Confluence, SharePoint) and technical writing tools (e.g., MadCap Flare).
• Training and Mentorship
o Description: Provide training and guidance to junior engineers and technical staff on electrical systems and processes.
o Methodologies: Implement training programs based on ADDIE (Analysis, Design, Development, Implementation, Evaluation) instructional design model.
• Cross-Functional Collaboration
o Description: Work with other departments (e.g., mechanical, software) to integrate electrical systems into larger projects.
o Tools/Software: Use collaboration platforms (e.g., Slack, Microsoft Teams) to facilitate communication across teams.
• Research and Development
o Description: Stay updated on emerging technologies and trends in electrical engineering to inform project decisions.
o Methodologies: Conduct technology assessments and feasibility studies using SWOT analysis.
• Stakeholder Communication
o Description: Communicate technical information effectively to stakeholders, including clients, management, and team members.
o Tools/Software: Use presentation tools (e.g., Microsoft PowerPoint, Prezi) for effective communication of complex ideas.
• Regulatory Compliance
o Description: Ensure all electrical work adheres to safety standards, codes, and regulations.
o Standards: Familiarity with National Electrical Code (NEC), Occupational Safety and Health Administration (OSHA) regulations, and local building codes.
Yêu cầu
Required Skills and Qualifications
N.B. Degrees and levels of experience are not specified for the vacancy. However, candidates have to prove how they are equipped with the requirements below. Related certificates or previous experience stories are also needed to be on the cover letter.
• Mastery of Theory and Application: Strong understanding of the theory and application of electronic component parts. Review, evaluate, and propose design improvements for Schematics & PCB, optimizing designs and troubleshooting issues (voltage drop, overheating components, unexplained component failures, etc.) on the circuit board before mass production.
• Project Planning: Develop detailed project plans, specifications, and test scenarios for circuit boards.
• Experience with System on Module (SoM) and System on Chip (SoC): Familiarity with platforms such as Jetson NX/Orin, CM4, IMX8P, etc.
• High-Speed PCB Design: Design PCBs for high-speed interfaces such as USB 3.0, HDMI 2.0, DDR3/DDR4, PCIe, NAND Flash, Ethernet 10/100/1000base-T. Strong knowledge of power consumption, signal integrity, crosstalk, timing; perform sensitive signal simulations before PCB fabrication.
• Knowledge of Control DRCs: Understanding of Design Rule Checks (DRCs), Electromagnetic Interference (EMI)/Electromagnetic Compatibility (EMC), shielding, and Electrostatic Discharge (ESD) on electronic circuit boards.
• EMC/EMI Compliance: Design PCBs that comply with EMC/EMI standards and know how to resolve related issues on circuit boards.
• Knowledge of DFM/DFA/DFT: Familiarity with Design for Manufacturing (DFM), Design for Assembly (DFA), Design for Testability (DFT), and PCB/PCBA processes according to IPC standards.
Additional requirements for UAV Systems Expert Position
• Energy Management Expertise: Understanding of energy density optimization in UAV systems. Experience with battery technologies that enhance flight duration and efficiency is essential.
• Communication Systems Knowledge: Proficiency in designing communication systems for UAVs, including secure data transmission protocols and energy-efficient communication methods.
• Sensor Integration Skills: Experience integrating various sensors into UAV platforms to enhance functionality. This includes knowledge of electrical requirements and data handling for sensors like LiDAR and thermal cameras.
• Autonomous Systems Knowledge: Familiarity with control systems for autonomous flight operations and algorithms used in trajectory planning and obstacle avoidance.
• Testing and Validation Proficiency: Ability to develop comprehensive test plans for electronic systems, including hardware-in-the-loop (HIL) testing and simulations to validate performance under various conditions.
• Regulatory Compliance Awareness: Knowledge of UAV regulations and standards related to electronics and safety requirements. Experience with documentation and certification processes is a plus.
• Software Tool Proficiency: Familiarity with PCB design software tools (e.g., Altium Designer) and simulation tools for signal integrity analysis. Programming skills in languages such as C/C++ or Python for embedded system development are advantageous.
• Problem-Solving Skills: Strong analytical skills to troubleshoot complex electrical issues during design and testing phases.
Quyền lợi
Khác
Opportunities to develope skills and knowledge in professional working environment.
Benefits comply with labour law.
Thông tin khác
NGÀY ĐĂNG
25/11/2024
CẤP BẬC
Nhân viên
NGÀNH NGHỀ
Khoa Học & Kỹ Thuật > Kỹ Thuật Điện/Điện Tử
KỸ NĂNG
Electrical Engineering, Project Management, PCB Design, Smart Energy Management, Problem-solving
LĨNH VỰC
Điện/Điện tử
NGÔN NGỮ TRÌNH BÀY HỒ SƠ
Bất kỳ
SỐ NĂM KINH NGHIỆM TỐI THIỂU
Không yêu cầu
QUỐC TỊCH
Không hiển thị
Xem thêm
Thông tin chung
Thu nhập: Thỏa thuận
Cách thức ứng tuyển
Ứng viên nộp hồ sơ trực tuyến bằng cách bấm nút
Ứng tuyển
bên dưới:

Tags:Tuyển dụng Hồ Chí Minh, việc làm Hồ Chí Minh, CÔNG TY CỔ PHẦN REAL-TIME ROBOTICS VIỆT NAM tuyển nhân viên

Contact seller Share

Comments